How to Configure Network Bonds?

Configuring/Updating a Port:

  1. Navigate to Networks and select the port that you wish to configure.
  2. Port Settings
    1. Port- The port number that is being configured.
    2. MTU- 9000 for 10G and 1500 for 1G
    3. DHCP- Enable if the IP Address is not being set statically.
    4. IP Address- Default is 172.27.port.250 where port is the number that was set earlier. For example setting up Port 2 would give us 172.27.2.250
    5. Subnet Mask- Default is 255.255.255.0
  3. Select to save the settings.