1. Help Center
  2. Setup and Installation

Default Port Configuration

Every Jellyfish comes with pre-configured IP addresses for each port. You may need to know these if, for example, you are connecting to a Windows workstation.

Except for Jellyfish Rack, we count the ethernet ports starting from left to right and then top to bottom. The first 2 ports are located on the motherboard and all of the rest are located on additional network cards. Note that the single ethernet port on the motherboard close to the USB ports does not participate in this count as this is for diagnostic use only (IPMI). 


Example:

port_map



All ports are by default configured with static IP addresses as it follows:

Port 1 - 172.27.1.250

Port 2 - 172.27.2.250

Port 3 - 172.27.3.250

Port 4 - 172.27.4.250

Port 5 - 172.27.5.250

Port 6 - 172.27.6.250

Port 7 - 172.27.7.250

Port 8 - 172.27.8.250

Port 9 - 172.27.9.250

Port 10 - 172.27.10.250

Port 11 - 172.27.11.250

Port 12 - 172.27.12.250

Port 13 - 172.27.13.250

Port 14 - 172.27.14.250

Port 15 - 172.27.15.250

Port 16 - 172.27.16.250

 

The subnet mask is 24/255.255.255.0 by default.